Ibm 8317 Instrukcja Użytkownika Pobierz pdf (Strona 10)

If NO, continue to 002.

If YES, proceed to 003.

002

If the Power Management feature is enabled, do the following:

1. Start the Configuration/Setup Utility program (see “IBM Setup Utility

program” on page 9)

2. Select Power Management from the Configuration/Setup Utility program

menu.

3. Select APM.

4. Be sure APM BIOS Mode is set to Disabled. If it is not, press Left Arrow (})or

Right Arrow (Æ) to change the setting.

5. Select Automatic Hardware Power Management.

6. Set Automatic Hardware Power Management to Disabled.

7. If the problem persists, continue to 003.

003

Run the Diagnostic programs. If necessary, refer to “Diagnostics” on page 12.

v If you receive an error, replace the part that the diagnostic program calls out or

go to ″Symptom-to-FRU Index″ on page 37.

v If the test stops and you cannot continue, replace the last device tested.

4 Hardware Maintenance Manual

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 151 152

Brak uwag

Ibm 8317 Instrukcja Użytkownika Strona 10